actiLib Autoloader 1U
– User and Service Guide
Page 51 of 97
To remove a magazine:
1.
From the Home screen, press
“Up” or “Down” on the OCP until the screen displays
Operations.
2.
Press
“Enter” to select.
3.
Press
“Up” or “Down” until the screen displays either Unlock Left Magazine, or Unlock Right
Magazine.
4.
Press
“Enter” to select the desired magazine to unlock.
5.
“Enter” the Administrative password if requested.
6.
The display will read Left Magazine Unlocked, or Right Magazine Unlocked.
7.
Pull the released magazine out of the loader.
8.
The screen will now display Insert Left Magazine, or Insert Right Magazine. The loader
cannot perform any other operation until the magazine is replaced. After exchanging tapes
in a magazine, slide the magazine completely into the loader. The magazine will lock into
place once it is correctly installed and the loader will inventory the magazine.
7.5.3 Removing and replacing a magazine using the RMU
1.
To login, enter the correct password, and press Enter.
Figure 213 RMU Login page
2.
Go to Operations > Magazines.
) allows the user to release the right or left magazine from the loader.
3.
Press the Release button.
4.
Remove the magazine from the unit.
