actiLib Autoloader 1U
– User and Service Guide
Page 28 of 97
CAUTION
To disconnect all power from the loader, remove the
power cord from the outlet. The power button only puts
the power on stand-by.
7.
Turn on the loader using the power button. Check the LCD screen to make sure the loader
is receiving power. If it is not, check the power connections and your power source. During
the Power-On-Self-Test (POST), all four LEDs are illuminated briefly, followed by a flashing
Ready LED. When the initialization sequence is complete, the Home screen will be
displayed.
8.
Plug in the host server or workstation and all attached devices.
9.
Turn on any other devices you turned off earlier.
10.
Turn on the server.
