ACTi ZNR, Руководство пользователя

Страница: 74 / 112

www.acti.com www.acti.com
User
’s Manual
73
Network Configuration
Network configuration is required if your NVR operates in a network.
NOTE: The default IP address is 192.168.1.30 for NIC 1 and 192.168.2.30 for NIC 2, and
likewise.
Basic Configuration
1.
Click System > Network > Basic .
2.
Set the network parameters as needed. For some NVR models, DHCP is enabled by
default.
You can choose a working mode if your NVR has two NICs:
Multi-address mode: The two NICs work independently and can be configured
separately. Either NIC can be chosen as the default route, and data will be forwarded
through this NIC when the NVR connects to the extranet.
Load balance mode: The two NICs are bound to the same IP address and work
together to share network traffic.
Net fault-tolerance mode: The two NICs are bound to the same IP address. In cases
where one NIC fails, the other takes over service seamlessly from the faulty one to
ensure network connectivity.
3.
Click Apply to save the settings.
NOTE:

For an NVR with multiple NICs, you can configure the NICs and choose a default route
(currently NIC1).

If your NVR has a PoE port or a switching port, you can configure an internal NIC IPv4
address.