www.acti.com
ENR-2000 Series System Administrator’s Manual
46
Format Hard Disks
You may execute disk formatting toward a newly-installed disk. You should follow the
installation procedures ( refer to
Install the Hard Disks
on page 20 ) to format the disks
before ENR system start carrying out the surveillance task, for a disk that is not in ENR file
system format is not ready for recording.
After the disk is installed and detected in
Storage Device
list, select it and click “
Format
”.
During normal operation, please
DON NOT REMOVE ANY DISK FROM THE DEVICE
, or it
might cause damage to the disks. You can only remove or install a disk when the device is
shut down.
If you have to format a disk having been recording for a while, it is suggested that you export
important video and system log in advance.
Please note that the system will stop recording during the disk formation.
