www.acti.com
ENR-2000 Series System Administrator’s Manual
17
Reset to Factory Default
By resetting this device, all your system settings will return to factory default, while the
previous recording files are still kept on storage disks. It is strongly recommended that you
back up previous settings with
Backup
function before resetting to factory default.
1.
To begin, please turn off the device first.
2.
Press down the
Power Button
to boot up the
device, immediately press and hold the
Reset
Button
with a pin or clip, the orange
System
LED
will light up for about 2~3 seconds, and
you may release the
Reset Button
as the
orange light is off. The device will then start
the resetting process.
After the device automatically reboots, the resetting process is done and you may log in.
LED Indicators
The LED indicators on front panel show the current device status:
Item
Indicator Status
Light Color
Description
Power LED
Solid
Blue
The device power is on.
System Status
LED
Lights up for three
seconds after
Reset
Button
is pressed
Orange
The system resetting process is
initializing.
Solid
The system service is running.
HDD LED
Flashing
Orange
The hard disk is busy handling
read or write requests.
