0-3
Step 1:
Switch off Video Encoderby disconnecting the power
cable
Step 2:
Using a suitable pointed object, press and continue to hold
the Reset Button depressed. While continuing to hold the reset
button depressed, reconnect the power cable.
Step 3:
Keep holding the reset button depressed around 6 seconds,
release the reset button. The unit will start up with factory default
settings.
7.
Terminal Blocks Pin 1~6
The Video Encoder supports two alarm input and two alarm
output. DI: Logic Level 0: 0~0.4V; Logic Level 1: 3.3~30V
DO: Logic Level 0: 0.1~0.6V; Logic Level1: 2.4~5V
Please find Support package” TS-00045” for details.
PIN
NAME
DESCRIPTION
1
DO1
Digital Output 1
2
DO2
Digital Output 2
3
GND
Ground Pin
4
DI1
Digital Input 1
5
DI2
Digital Input 2
6
GND
Ground Pin
8.
Terminal Blocks Pin 7~12
Pin 7~10: RS232/422/485. Default mode is RS-485
Pin 11~12: DC 12V power input
PIN
NAME
DESCRIPTION
RS-485
RS-422
RS-232
7
Tx+
D+
Tx+
Tx
8
Tx-
D-
Tx-
9
Rx+
Rx+
Rx
Содержание ACD-2100T
Страница 1: ...1 channel MPEG 4 Video Encoder ACD 2100T Ver 070206 Quick Installation Guide...
Страница 2: ......
Страница 11: ...1 3 2 1 4 Preview the video 2 1 5 Set the new IP address...