Acson international A5MSX 20 A, Руководство пользователя

Страница: 16 / 68

13
A5MSX-2009
Mounting Installation Plate
Ensure that the wall is strong enough to withstand the weight of the unit. Otherwise, it is necessary to reinforce
the wall with plates, beams or pillars.
Use the level gauge for horizontal mounting, and fix it with 4 suitable screws.
In case the rear piping draws out, drill a hole 65mm in diameter with a cone drill, slightly lower on the outside
wall (see figure)
Hole With Cone Drill
Mount The Unit Onto The Installation Plate
Hook the indoor onto the upper portion of the installation plate (Engage the two hooks at the rear top of the
indoor unit with the upper edge of the installation plate). Ensure that the hook are properly seated on the
installation plate by moving it to the left and right.
Water Drainage Piping
The indoor pipe must be in a downward gradient for smooth drainage. Avoid situations that are likely to cause
water leak.
72.0
'A' 'A'
Screw position in the wall
ø 65.0mm Hole in the wall
Screw position in the wall
Ø 65.0 mm Hole in the wall
CENTER LINE
Indoor Side
Outdoor Side
Correct
End
Dipped
Into
Water
Water
Leaking
Water
Leaking
Water
Leaking
Wrong
Wrong
Wrong
Drain
1. Hook the unit onto the installation plate
Application Information