ACS UK1401 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 44

ACS UK1401 Скачать руководство пользователя страница 38

Ultrasonic tester UK1401

Operation Manual

38

ACOUSTIC

CONTROL

SYSTEMS

3

MAINTENANCE

The maintenance of the instrument includes cleaning the electronic unit from dirt and dust, and charging the battery.

3.1 ACCUMULATOR

The rechargeable battery is designed to be operated within a broad temperature range. At negative temperatures the

battery capacity is reduced. At low temperatures the capacity is 15% below the capacity at normal temperatures.

The instrument will automatically switch off when the battery is completely discharged.
The accumulator is equipped with built-in battery overcharge protection, over discharge, over current and over temperature.
The battery service life is designed for the guaranteed service life of the instrument.
The battery shall be replaced by service centers only.

ATTENTION:

THE INSTRUMENT WARRANTY WILL BE VOIDED, IF THE USER REPLACES THE BATTERY INDEPENDENTLY!

3.2 CHARGING THE ACCUMULATOR

The battery shall be charged via the external charger or PC.
The charging time depends on the depletion of the accumulator. The total charge time is 4 to 5 hours. Multi-recharging is

allowed.

The instrument can be operated during battery charging, though the charging time will increase to 2 to 3 times.

ATTENTION:

NEVER STORE THE INSTRUMENT WITH THE DISCHARGED BATTERY TO PREVENT ITS FAILURE!

3.3 TROUBLESHOOTING

Contact the representatives of the manufacturer if you have questions about operation of the instrument to get assistance

and consult the experts.

«
...
36
37
38
39
40
...
»

Содержание UK1401













































Отзывы:

Нет отзывов