TC110 Series
Water Temperature Control Units 882.03888.00
•
09/19/2018
32
Shutting Down the Temperature Control Unit
Cool the unit down by selecting a set point of 32°F. Let the unit stabilize at one temperature
close to the incoming water temperature, then press the STOP button. Now press the VENT
button to relieve any remaining pressure in the system.
Maintenance
Never attempt to service a unit until a qualified electrician
has opened and locked out the main disconnect using OSHA
1910.147 standards.
The water supply should be turned off and internal pressure
should be relieved before you remove panels.
All electrical connections must be done by a qualified electrician.
Disconnect all power to the unit, let the unit cool
down, and turn off the water prior to any servicing.
Failure to do so can result in SERIOUS INJURY OR
DEATH!
