TC110 Series
Water Temperature Control Units 882.03888.00
•
09/19/2018
30
4-7
Controller Display
Figure 7
Typical Eurotherm
Microprocessor controller
Measured Temperature Value Numeric LED
During normal operation, the large green PV Process Value LED on the controller displays
the actual process temperature at the To Process thermocouple. It also lists parameter
symbols during setup and error messages if an error occurs.
Required Temperature Numeric LED
During normal operation, the smaller green SP Set Value LED on the controller displays the
process set point you want the chiller to maintain. It also displays parameter and pre-set
function values during setup.
See figure 7
Page Key
From any display – press to return to the HOME display.
Scroll Key
Press to select a new parameter. If held down it will continuously scroll through the
parameters.
