7
A1207 PenGauge
© 2022 Acoustic Control Systems – ACS Group
Operation manual
Operation manual
1.2.3.1
Instrument design
А1207 Ultrasonic Thickness Gauge is a pocket-type one-piece case (see figure below)
with a built-in accumulator battery and a built-in double-crystal transducer or single-
crystal transducer (if requested).
Lab
le
Description
u
On/Off Key
v
Capsule of the piezoelectric transducer
w
Tip
x
Tuning keys
y
Digital display
z
USB port
{
Eyelet for strap
The instrument's design allows the replacement of the worn-out capsule of the built-in
transducer by unscrewing the tip detaching the transducer capsule from the instrument
without extra tools (see
Replacement of the transducer capsule
).
The
key is used to:
·
switch the instrument On/Off;
·
toggle between the measurement units (millimeters/inches).
The setting keys
and
are used to switch:
·
the velocity adjustment mode;
·
the calibration mode.
The digital measurement results, the ultrasound velocity, the accumulator battery state,
and the current measurement units (see figure below) are displayed on the screen.
The USB connector is used to connect the power adaptor 220 V – USB to charge the
built-in accumulator battery.
14