30
A1207 PenGauge
© 2022 Acoustic Control Systems – ACS Group
Application software
Application software
Pictogra
m
Functions
ACF – Auto Correlation
Function (currently
unavailable)
Chosen algorithm for calculating the result (ACF,
One peak, One gate two peaks, Two gates).
Available only in manual mode. Clicking on the
corresponding button opens the dialog for
algorithm selection.
One peak (currently
unavailable)
One gate two peaks
(currently unavailable)
Two gates (currently
unavailable)
Allows you to save the current measurement result with a plot (A-Scan).
Selects gate as the active control element to interact on A-Scan or apply
joystick actions. In the case of manual mode and if the ACF algorithm is
selected, the click and hold enable you to reset the gate.
Selects signal as the active control element to interact on A-Scan or apply
joystick actions. Clicking and holding on this button (only in manual mode,
see
for more information) opens the dialog for selection gain
instead of zoom
(and vice versa). In this case, the joystick action is
applied to the gain.
Joystick actions to zoom/pan the signal, to resize/move the gate or to
increase/decrease the gain.
Sav ed result
When the results in the A-Scan tab are saved, the plot image is saved simultaneously. In
the cell table, such results are marked with a paperclip symbol. The “Show A-Scans”
command allows you to see the signal image connected to the corresponding result (see
Figure 9).
36
