ACS HE Series, Руководство по эксплуатации и инструкция

Страница: 16 / 83

HE Series Central Chillers • 882.03862.00 • 12/02/2021
16
Chapter 3: Functional Description
3-1 Models Covered in This Manual
This manual provides operation, installation, and maintenance instructions for air-, water-and
remote air-cooled central chillers. Model numbers are listed on the serial tag. Make sure you
know the model and serial number of your equipment before contacting the manufacturer for
parts or service.
Our central chiller models are designated by approximate output in Tons of cooling (20T,
25T, 30T, 40T, 50T,60T) and the cooling method used: -W for water-cooled, and –R for
remote-air cooled.
3-2 General Description
Our central chillers are reliable, accurate, and easy to use process cooling units. They are
available in water- and remote air-cooled designs in a range of sizes from 20T through 60T
(Tons of refrigeration). All are shipped ready to use. (Remote air-cooled chillers require field
installation by qualified technicians.) In the standard configuration the chiller basically
consists of a compressor, condenser, evaporator, metering device and a control platform. All
of these components, plus the other integral components that are used to maintain your tank
temperature, are described throughout this Chapter as well as Chapters 4 - 7.
Standard range of operation is 50ºF to 80ºF (10ºC to 27ºC) for water only applications, for
applications using a water/glycol mix in their pump tank 20ºF to 50ºF (-7º to 10ºC).
Typical Applications
This series of central chillers can be used in any application that needs a constant source of
cool process water. Typical applications include, but are not limited to, the following:

Injection molding

Blow molding

Extrusion

Thermoforming

Machine tool

Metal plating

Thermal spray

After-coolers (air compressors, dryers, etc.)

Laser

Printing (offset, gravure, digital)
System Limitations
System should be sized so that at a minimum a Master and a Drone module exist.