ACS ALCOLOCK LR, Руководство по установке

Страница: 58 / 72

ALCOLOCK LR
57
1. Check that the Idling rpm reading reflects the reading on the
dashboard rpm gauge.
2. If the Idling rpm reading is acceptable, press Set Tach to
reset the rpm thresholds.
After “Set Tach” is pressed, the “Idling” rpm reading (on the
first line) is used to reset the “Idle Point” and “Run Point”
tach thresholds (the second and third lines).
TACH is displayed, along with the following:
• Idling – the vehicle engine rpm reading
• Idle Point – reset to 0.5 x the Idling engine rpm
• Run Point – reset to 1.5 x the Idling engine rpm
Next is displayed at the bottom-left of the screen.
3. If the tach thresholds are correct, press Next (otherwise press
Set Tach until a correct tach threshold is obtained).
After Next is pressed, ACCELERATE is displayed, along with
the following:
• Idling – the current engine rpm
• Idle Point – the reset rpm threshold value
• Run Point – the reset rpm threshold value
ATTENTION!
Ensure that the vehicle is in the park or neutral
position, with parking brake engaged, to prevent the vehicle
from moving.
4. Press the accelerator pedal and steadily increase the engine
rpm to a point slightly above the Run Point rpm threshold
value on the third line. (This is to validate the Run Point rpm
threshold value that was reset in step 3.)