ACS ALCOLOCK LR, Руководство по установке

Страница: 29 / 72

Installation Manual
28
Next is displayed at the bottom-left of the screen.
3. If the tach thresholds are correct, press Next (otherwise press
Set Tach until a correct tach threshold is obtained).
After
Next
is pressed,
ACCELERATE
is displayed, along with
the following:
•
Idling
– the current engine rpm
• Idle Point – the reset rpm threshold value
• Run Point – the reset rpm threshold value
ATTENTION!
Ensure that the vehicle is in the park or neutral
position, with parking brake engaged, to prevent the vehicle
from moving.
4. Press the accelerator pedal and steadily increase the engine
rpm to a point slightly above the Run Point rpm threshold
value on the third line. (This is to validate the
Run Point
rpm
threshold value that was reset in step 3.)
If the Run Point value is correct, Turn Off Engine is
automatically displayed after the engine rpm exceeds the value
on the third line.
5. Turn the key to the off position. (Press Cancel to return to the
Install menu.)
Skip sections 16.2.2 and 16.2.3 and continue to section 16.3 to
input the odometer reading.
16.2.2 OBD Speed
NOTE: Read this section for hybrid vehicles only.
After selecting the
OBD/SPEED
option in section 16.2 “OBD
Select”, CHECK SPEED is displayed.
Speed is displayed at 0, however the value may slightly
fluctuate.