ACS ALCOLOCK LR, Руководство по установке

Страница: 56 / 72

ALCOLOCK LR
55
After Next is pressed, ACCELERATE is displayed, along with
the following:
• Idling – the current engine rpm
• Idle Point – the reset rpm threshold value
• Run Point – the reset rpm threshold value
ATTENTION!
Ensure that the vehicle is in the park or neutral
position, with parking brake engaged, to prevent the vehicle
from moving.
4. Press the accelerator pedal and steadily increase the engine
rpm to a point slightly above the Run Point rpm threshold
value on the third line. (This is to validate the Run Point rpm
threshold value that was reset in step 3.)
If the Run Point value is correct, Turn Off Engine is
automatically displayed after the engine rpm exceeds the
value on the third line.
5. Turn the key to the off position. (Press Cancel to return to the
Removal menu.)
Skip sections 22.3.2 and 22.3.3 and continue to section 22.4 to
input the odometer reading.
22.3.2 OBD Speed
NOTE: Read this section for hybrid vehicles only.
After selecting the OBD/SPEED option in section 22.3 “OBD
Select”,
CHECK SPEED
is displayed.
Speed is displayed at 0, however the value may slightly
fluctuate.
The OBD-II speed threshold is already programmed into
the software and does not need to be set. Do not move the
vehicle.