ACS AET62, Справочное руководство

Страница: 9 / 37

AET62 Reference Manual
Version 1.0
Page 9 of 37
idvation GmbH
Otto-Hesse-Straße 19 / T5 Phone +49 6151 4923021
D-64293 Darmstadt Fax +49 6151 3689296
info@idvation.com www.idvation.com
5. PICC Commands for General Purposes
5.1. Get Data
The “Get Data command” will return the serial number or ATS of the “connected PICC”.
Version 1.00
Command Class INS P1 P2 Le
Get Data FF CA 00 01 00 00
(Full
Length)
Table 4: Get UID APDU Format (5 Bytes)
Response Data Out
Result UID
(LSB)
UID
(MSB)
SW1 SW2
Table 5: Get UID Response Format (UID + 2 Bytes) if P1 = 0x00
Response Data Out
Result ATS SW1 SW2
Table 6: Get ATS of a ISO 14443 A card (ATS + 2 Bytes) if P1 = 0x01
Results SW1 SW2 Meaning
Success 90 00 The operation is completed
successfully.
Error 63 00 The operation is failed.
Error 6A 81 Function not supported.
Table 7: Response Codes
Example:
1. To get the serial number of the “connected PICC”
UINT8
GET_UID
[5]={
0xFF, 0xCA, 0x00, 0x00, 0x04
};
2.
To get the ATS of the “connected ISO 14443 A PICC”
UINT8
GET_ATS
[5]={
0xFF, 0xCA, 0x01, 0x00, 0x04
};