manualshive.com logo in svg

ACS A1020 MIRA Lite, Руководство по эксплуатации

Поделиться
Скачать
ACS A1020 MIRA Lite Скачать руководство пользователя страница 41

А1020 MIRA Lite Low-Frequency Ultrasonic Tomograph

Operation Manual

41

ACOUSTIC 

CONTROL 

SYSTEMS

5

 TRANSPOR- 

TATION

The device shall be transported by all types of closed transport in the hard case included in the delivery kit.
The packaged devices can be transported in any vehicles at any distances without speed limits.
The packaged devices should be properly and steadily fixed to prevent shocks of devices against each and 

against vehicle walls during the transportation. When transported in open vehicles the device shall be protected 
against rain and water splashes.

If shipped by air transport, properly packed instruments should be placed in hermetically sealed and heated 

compartments.

In case the transportation conditions differ from the operation conditions, the instruments shall be kept under 

normal environmental conditions for at least 2 hours prior to operation.

Содержание A1020 MIRA Lite













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды