manualshive.com logo in svg

Acrosser Technology AR-B1380, Руководство пользователя, Страница: 60 / 79

Поделиться
Скачать
Acrosser Technology AR-B1380 Скачать руководство пользователя страница 60

AR-B1380/AR-1380A User’ s Guide

Page 58

6.4.4  RAM Disk

(1) Switch and Jumper Setting

Step1:

Use jumper block to set the memory type as ROM (FLASH).

Step2:

Select the proper I/O base port, firmware address, disk drive number on SW2.

Step3:

Insert programmed SRAM chips into sockets starting at MEM1.

NOTE:

 If you use the SRAM, please skip the SW2-7 & SW2-8 setting.

Function

M1-M3 Setting

JP6 Setting

SRAM

Figure 6-10 SRAM Jumper Setting

(2) Software Programming

It is very easy to use the RAM disk.  The RAM disk operates just like a normal floppy disk.  A newly installed RAM disk

needs to be formatted before files can be copied to it.  Use the DOS command [FORMAT] to format the RAM disk.

Step 1:

Use jumper block to select the memory type as SRAM refer.

Step 2:

Select the proper I/O base port, firmware address and disk drive number on SW2.

Step 3:

Insert SRAM chips into sockets starting from MEM1

Step 4:

Turn on power and boot DOS from hard disk drive or floppy disk drive.

Step 5:

Use the DOS command [FORMAT] to format the RAM disk.  If you are installing SRAM
for the first time.
To format the RAM disk and copy DOS system files onto the RAM disk.

C:\>FORMAT [RAM disk letter] /S /U

To format the RAM disk without copying DOS system files into the RAM disk.

C:\>FORMAT [RAM disk letter] /U

Step 6:

Use the DOS command [COPY] to copy files onto the RAM disk.  For example, if you
want to copy file <EDIT.EXE> to the RAM disk from drive C: and the RAM disk is
assigned as drive A:.

COPY C:EDIT.EXE A:

NOTE:

 In addition, you can use any other DOS command to operate the RAM disk.

Содержание AR-B1380
















































































Отзывы:

Нет отзывов