manualshive.com logo in svg

Acrosser Technology AR-B1380, Руководство пользователя, Страница: 35 / 79

Поделиться
Скачать
Acrosser Technology AR-B1380 Скачать руководство пользователя страница 35

AR-B1380/AR-B1380A User’ s Guide

Page 33

AR-B1380A

CPU Boad

LCD

Panel

Inverter

Board

VBL Control

+12V, +5V

VEE

FL HIGH

Voltage

Figure 4-2 LCD Panel Block Diagram

This block diagram shows that the AR-B1380A still needs other components to be used for LCD panel.
The inverter board provides the control for the brightness and the contrast of the LCD panel while the
transfer is the one that supplies the high voltage to drive the LCD panel.  Each item will be explained further
in this section.

Pin 1

AR-B1380A

CPU Board

Pin 1

LCD

Panel

Inverter & Contrast

CN4

Figure 4-3 LCD Panel Cable Installation Diagram

NOTE:

 Be careful with the pin orientation when installing the connectors and the cables.  A wrong connection

can easily destroy your LCD panel.  Pin 1 of the cable connector is indicated with a sticker and pin1 of the
ribbon cable usually has a different color.

4.2.1 Inverter Board Description

The inverter board supplies the high voltage signals to drive the LCD panel by converting the 12 volt signal
from the AR-B1380A into high voltage AC signal for LCD panel.  It can be installed freely on the space
provided over the VR board.  If the VR board is installed on the bracket, you have to provide a place to
install the inverter board into your system.

4.2.2 LCD Settings and Connectors

The AR-B1380A supports CRT color monitors, STN, Dual-Scan, TFT, monochrome and color panels.  It
can be connected to create a compact video solution for the industrial environment.  1MB of RAM on-
boarded allows a maximum CRT resolution of 1024X768 and a LCD resolution of 640X480 with 64K colors.
For different VGA display modes, your monitor must possess certain characteristic drives to display the
mode you want.

Содержание AR-B1380
















































































Отзывы:

Нет отзывов