manualshive.com logo in svg

Acrosser Technology AR-B1380, Руководство пользователя, Страница: 40 / 79

Поделиться
Скачать
Acrosser Technology AR-B1380 Скачать руководство пользователя страница 40

AR-B1380/AR-1380A User’ s Guide

Page 38

5.2  UTILITY DISKETTE

AR-B1380 provides one diskette with the SSD utility and manual file

AR-B1380A provides two utility diskettes: DISK1 for the WIN31 and MS-DOS VGA drives; Disk2 for the
LAN driver, SSD utilities and the manual file.  If your operation system is neither WIN31 nor WIN95, please
contact Acrosser for the proper VGA drivers.  Also you may refer to the Readme.txt for any troubleshooting
before installing the driver.

5.2.1  VGA Driver

(1) WIN 3.1 Driver

For the WIN31 operating system, you must decompress the compress file in the DOS mode.  And then
follow these steps:

Step 1:

Execute the SETUP.EXE file in the DOS mode.

A:\>SETUP

Step 2:

The screen shows the chip type.  Press any key to enter the main menu.

Step 3:

There are nine items in the main menu.  Select the <Windows Version 3.1> item.  Notice
the function key defined. Press [ENTER] to select the <All Resolutions>.  When this line
appears with the [*] symbol, it means this item is selected.  Press [End] to start the
installation.

Step 4:

The screen will show the dialog box to ask you to type the WIN31’ s path.  The default is
C:\WINDOWS.

Step 5:

Follow the onscreen messages.  When the setup is completed, the system will generate
the message as follows.

Installation is done!

Change to your Windows directory and type SETUP to run the Windows Setup program.
Choose one of the new drivers marked with an *.  Please refer to the User’ s Guide to
complete the installation.

Step 6:

Press [Esc] key to return to the main menu, and re-press [Esc] again to return to the DOS
mode.

Step 7:

Enter WIN31.  You can find the <Chips CPL> icon located in the {CONTROL PANEL}
group.

Step 8:

Adjust the <Refresh Rate>, <Cursor Animation>, <Font size>, <Resolution>, and <Big
Cursor> functions.

5.2.2  SSD Utility

To support the AR-B1380/AR-B1380A solid state disk’ s operations, the following files have been provided
on the enclosed diskette’ s directory <SSD>.

Caution: AR-B1380/1380A don’ t support the application of SCSI card.

(A) WD1380.EXE/WD6117C.EXE

WD1380.EXE   : These two programs demonstrate how to enable and trigger the watchdog timer.
WD6117C.EXE: It allows you to test the <TIME-OUT & RESET> function when the watchdog timer is

enabled.

Содержание AR-B1380
















































































Отзывы:

Нет отзывов