Acroprint ATR360, Руководство пользователя

Страница: 21 / 34

17
Battery Pack Specs:
Voltage: DC 14.4v
Capacity: 1800mA
Standby mode: 30-36hr reserve power
Fully charged: 5 days use (300 punches/day)
Note: Actual battery life depends on many factors such as battery age, temperature, discharge
history, etc., and can vary greatly depending on these factors.
The ATR360 should be plugged in for 12 hours to fully charge the battery pack.
For more information see
“
Installing the Operational Battery Pack” in the Appendix.
Warning:
Batteries may leak, overheat, catch fire or explode if proper safety & handling procedures are not
followed:

DO NOT get batteries wet

DO NOT place batteries near heat sources

DO NOT use any power supply other than the original
one supplied with the time recorder.

DO NOT inverse polarity connection

NEVER throw batteries into fire. Properly dispose of
batteries according to local rules and regulations.

DO NOT allow anything to short circuit the batteries

Dropping a battery may damage the battery.

Replace the battery if you suspect any damage.
Internal View
(Internal Control Panel)
Note: turning the Fingerprint
Reader off will also disable the
Proximity Badge Reader.