85
Copyright © Acronis, Inc., 2000-2010
Note: Acronis Backup & Recovery 10 Online supports only HTTP and HTTPS proxy servers.
Proxy settings for the agent and the management server are configured separately, even if both are
installed on the same machine.
To set up proxy server settings
1.
Select the
Use a proxy server
check box.
2.
In
Address
, specify the network name or IP address of the proxy server—for example:
proxy.example.com
or
192.168.0.1
3.
In
Port
, specify the port number of the proxy server—for example:
80
4.
If the proxy server requires authentication, specify the credentials in
User name
and
Password
.
5.
To test the proxy server settings, click
Test connection
.
3.3
Machine options
The machine options define the general behavior of all Acronis Backup & Recovery 10 agents
operating on the managed machine, and so the options are considered machine-specific.
To access the machine options, connect the console to the managed machine and then select
Options > Machine options
from the top menu.
3.3.1
Machine management
This option defines whether the machine has to be managed centrally by the Acronis Backup &
Recovery 10 Management Server.
To be able to use this option, you must be logged on as a member of the
Administrators
group on
the machine.
You have the opportunity to register the machine on the management server when installing an
Acronis Backup & Recovery 10 agent. If the machine is not registered, selecting
Centralized
management
here will initiate the registration (p. 397). Or you can add the machine to the
management server on the server side. Any of the three registration methods require the server
administrator privileges.
Selecting
Stand-alone management
on a registered machine will result in the machine stopping
communication with the server. On the management server, the machine appears as
Withdrawn
.
The management server administrator can delete the machine from the server or register the
machine once again.
The preset is:
Stand-alone management
.
To set up centralized management on the machine:
1.
Select
Centralized management
.
2.
Specify the
Management Server IP/Name
.
3.
Specify the user name and password of the management server administrator on prompt.
4.
In the
Machine's registration address
, select how the machine will be registered on the
management server: by its name (recommended) or by its IP address.
5.
Click
OK
and the machine will be registered on the management server.
To disable centralized management, select
Stand-alone management
.
