117
Copyright © Acronis, Inc., 2000-2010
The preset is:
Wait until the conditions are met.
Wait until the conditions are met
With this setting, the scheduler starts monitoring the conditions and launches the task as soon as the
conditions are met. If the conditions are never met, the task will never start.
To handle the situation when the conditions are not met for too long and further delaying the backup
is becoming risky, you can set the time interval after which the task will run irrespective of the
condition. Select the
Run the task anyway after
check box and specify the time interval. The task will
start as soon as the conditions are met OR the maximum time delay lapses, depending on which
comes first.
Time diagram: Wait until conditions are met
Skip the task execution
Delaying a backup might be unacceptable, for example, when you need to back up data strictly at the
specified time. Then it makes sense to skip the backup rather than wait for the conditions, especially
if the events occur relatively often.
3.4.1.19
Task failure handling
This option is effective for Windows and Linux operating systems.
This option is not available when operating under the bootable media.
This option determines the program behavior when any of the backup plan's tasks fails.
The preset is
not to restart a failed task.
