ACR STOVES NEO Electric, Инструкция для пользователя, установки и обслуживания

Страница: 17 / 50

Installa � on of the appliance
The appliance is supplied in separate boxes, please refer to the packing list above.
The installer is required to install the burner, op
� onal rear panel, op � onal LED kit and log
set to the appliance.
Flue con fi gura � on
The appliance is pre-set with a ver � cal fl ue con fi gura � on, if this is the desired fl ue route
then no further ac � on needs to be taken.
The appliance is able to be installed with a rear fl ue op � on when used in conjunc � on with
the ACR snorkel kit, to prepare the appliance for this applica � on the fl ue collar assembly will
need to be removed from the top of the appliance and swapped to the rear of the
appliance.
1. Remove free fl oa � ng top plate, remove air
intake collar and gasket, and remove
inner fl ue outlet collar and gasket.
2. Swap the blanking plates, fl ue collars and
gaskets and re � ghten
fi xing bolts. Place the cosme � c blanking
plate onto the top of the free - fl oa � ng
top plate.
16