ACR STOVES NEO Electric, Инструкция для пользователя, установки и обслуживания

Страница: 15 / 50

Installa � on Instruc � ons
Gas Connec � on
This appliance has a gas inlet connec � on of Ø 8mm.
Ven � la � on
This appliance is a Balanced Flue room sealed appliance, and as such needs no addi � onal
ven � la � on. However, an adequate supply of fresh air to maintain temperatures and a
comfortable environment is recommended.
This appliance may be installed in a completely sealed or mechanically ven
� lated house.
Do not install the appliance in a bathroom or a room that contains a bath or shower.
Do not cover the appliance and or do not wrap it in an insula � on blanket or any other
material.
Do not make any changes to the appliance.
The gas connec � on must be in accordance with local and na � onal regula � ons.
This appliance is intended for use on a gas installa � on with a governed meter.
Appliance Fireplace Installa � on
Determine the posi � on required for the appliance.
Create a gas connec � on for the appliance in approximately the correct loca � on for the gas
controls.
The gas controls are connected to the Burner of the appliance.
For clearance details see below.
The clearance distance of the Flue from combus
� bles must not be less than 75mm. This
dimension can be reduced to 25mm as the distance from the underside and the sides of
horizontal fl ue runs.
Hearth
A hearth conforming to na � onal regula � ons should be provided for the stove extending
to at least the front of the suppor � ng legs, and to at least each side of the stove. ACR
recommend a hearth footprint 50mm more on all 4 sides than the footprint of the
appliance. The hearth should have a minimum thickness of 12mm.
14