Important!
• Before installation and/or use of this
appliance please read these instructions
carefully to ensure that all requirements are
fully understood.
• This appliance must be installed by a
registered engineer, or approved by building
control, failure to do so may endanger life and
property.
• All the instructions in this manual should work
in conjunction with building regulations
document J. If there is a variation the most
stringent requirement should be adhered to.
• The installation of this appliance must comply
with current Building Regulations and local
regulations, including those referring to
national and European standards.
• Do not operate this appliance if it becomes
damaged.
• Improper use, maintenance or fitting parts
other than those approved by the
manufacturer could lead to the appliance
becoming damaged or unsafe which in turn
could lead to personal injury or damage to
the property and will void the warranty.
• The appliance must not be modified in
anyway unless authorised by ACR Heat
Products Ltd.
• The appliance should be inspected regularly
to ensure the airways are clean and free from
obstruction and the chimney swept at least
once a year.
• The external surfaces of this appliance will be
very hot to the touch when in operation and
due care will need to be taken when
operating the appliance to ensure safety. A
fire guard should be fitted if it is likely that the
elderly, infirm or children may come into
contact with the appliance.
• This appliance has been designed for
intermittent operation.
• This appliance must not be used as an
incinerator.
• Each installation is unique to the property, the
information contained in this manual may not
give exact installation requirements for your
installation.
• The installation must comply with Building
Regulations, European Standards and Local
authority bylaws. Asbestos This appliance
contains no asbestos, if there is the
possibility of disturbing any asbestos in the
installation of this appliance then specialist
advise must be sought and appropriate
precautions taken. Metal Parts This appliance
may contain sharp metal edges, take care
when installing or servicing this appliance to
avoid personal injury. Please use appropriate
personal protective equipment at all times.
To ensure that you gain the most from your purchase, please take a few minutes
to read through this manual before lighting the appliance for the first time.
Since April 2002 only registered competent installers can install solid fuel appliances. Installations
carried out by non-registered installers must be inspected by local authority building control.
For more information please contact hetas at: www.hetas.co.uk or telephone: 0845 6345626
Before installation, please ensure that the correct model has been supplied.
Please make a note of the serial number of your appliance in the space provided on the front cover of
this manual as this will be requested if you require technical assistance in the future.
Please also ensure that the commissioning checklist at the rear of the manual is completed in full.
2
NEO ECO range manual 0620-6 25/06/2020 11:18 Page 2
