NOTE:
A
NO
-
HEAT
or
FROST PROTECTION
mode command from a programming base
unit overrides the
COMFORT
,
ECO
and
FROST PROTECTION
operating modes described
above.
Indicates that the radiator is heating
Indicates that the
TIMER
or
TIMERPROG
function is active
Indicates that the
ELECTRONIC LOCK
is active
23
E N
COMFORT
MODE
MODE
SYMBOL
VERTICAL DISPLAY
/
HORIZONTAL DISPLAY
ECO
MODE
FROST
PROTECTION
MODE
NO HEAT
MODE
AUTO
MODE
(2 variants)
WITH
PLC
WITH
PILOT WIRE
2. Using your appliance
with the thermostat
2.1 The operating modes
To switch between modes, press the
MODE
button.
COMFORT
This mode should be used when the room is occupied
(default temperature: 19°C). Temperature is adjustable between 7
and 28°C by pressing the + and – buttons.
ECONOMY (ECO)
This mode should be used for periods of absence.
It is recommended for periods of absence longer than 2 hours (default
temperature: 15.5°C).
The default Eco mode temperature is your
chosen Comfort mode temperature minus 3.5°C
.
FROST PROTECTION
This mode should be used when the room is
unoccupied for long periods. It is recommended for periods of
absence longer than 24 hours (non-adjustable temperature: 7°C).
NO-HEAT
The appliance is in no-heat mode.
AUTO
A box around this symbol indicates that the appliance is
controlled by a Powerline Carrier unit* (not supplied). If there is no
box, the appliance is controlled by a Pilot Wire programming base unit*
(not supplied).
* Temperature settings may only be changed on your appliance.
22
E N
CL
IC
K
!
+ button
- button
LCD display
TIMER button
MODE button
