Acova ASV-060-090/GF, Инструкция по эксплуатации

Страница: 43 / 45

83
05/2019
82
40019308
9. Services and guarantee
After-sales service
If your appliance stops working or you require spare parts, contact your installer or dealer.
Prior to making contact and to ensure your problem is dealt with quickly and effectively, please
make a note of:
- the details shown on the appliance nameplate (see chapter 2.2 ),
- the sales reference for your appliance shown on your dated purchase invoice,
- the remote control version number (see
chapter 5.3 , parameter 9).
Guarantee
( See general conditions of sale for your country )
The heating body of your electric radiator is guaranteed against manufacturing defects for five
(5) years from the date of purchase, while the other components are guaranteed for two (2) years.
Dated proof of purchase must be presented to activate the guarantee. The guarantee does not
cover radiator transport, removal and installation costs.
The guarantee shall not apply if the appliance is installed, used or maintained in a way that does
not comply with standards in force in the relevant country, good professional practice, or the manu-
facturer’s instructions.
Guarantee specific to dual-energy, towel-drying radiators
The guarantee for your dual-energy towel dryer is subject to the following reservations:
- water used in the heating circuit is neither aggressive nor corrosive.
- there are no traces of dissolved gases (0
2
-CO
2
), notably where gas-permeable materials are
used (heating floor).
In such a case, thorough degasification must be performed upstream from the circulator and the
bleed tap on the upper section of the appliance.
Disposal of end-of-life electrical and electronic appliances. This symbol indicates
that this product should not be disposed of with household waste. It must be taken to a
suitable collection point to be recycled. By disposing of this product correctly, you will help
prevent potential negative consequences for the environment and human health.
Standby consumption for the appliance < 0.5W
8.4 Replacing batteries



Remove
the used
batteries.

Insert
the new
batteries.
mode
mode
Lever off the frame.
Replace the control frame.
See
chapter 4.1 to reset the
remote control.
mode
boost
When the low battery indicator light is displayed, you
have a few days to replace them (2x 1.5V alkaline batte-
ries, type LR03 or AAA; we advise against using rechar-
geable batteries).
The screen’s backlighting also stops turning on to indicate
the need to change batteries.
When batteries are replaced, the remote control parame-
ters are stored (e.g.: P1 and P2 programming), except for
time and date settings.
You should take the following precautions:
– ensure c/– polarity;
– take care when disposing of used batteries: protect
the environment by disposing of them at an approved
collection point.
Re-pairing takes place automatically when batteries are changed.
If the screen is still showing
RF 0
, and the icon flashes, this means the remote control is loo-
king for the receiver. If it has still not found the receiver after several minutes, carry out a
complete reset (see chapter 8.3 ).