AXIOM BDA 04-2021
24
After lateral compensation and pivot balance having
been achieved, the skating force depends to a
considerable degree on applied tracking force and
stylus shape. This is also the reason why you do not
find an “anti-skating” scale here. It would - in most all
cases - be misleading.
For best results, I strongly recommend not just trusting
a “skating force track test record”, but use a good,
pure - and demanding in its dynamic scale - acoustical
recording of a single voice with guitar to perfect the
fine tuning of the anti-skating setting.
„Opus3“ and similar audiophile purist labels do offer
many such well suited recordings.
Now you are done with mounting and initial set-up.
Thank you for your care and patience while
following me through this manual.
For the dedication and precision you have applied to
mounting and aligning your
AXIOM
, you will be
rewarded with endless hours of the most detailed,
colorful, dynamic and distortion-free sound from your
favourite records.
We did our best to provide as complete a manual as
possible. Should you have any comment or
constructive criticism to share, we would very much
appreciate to hear from you and your experiences.
Feedback for us is very important and helps us to
further improve our designs - by tuning them to your
needs and demands.
Please do contact us - we highly value direct feedback
from the experienced users of our components.
After all - the
AXIOM
was designed for you.
Now enjoy your records!
Specifications
Design-inherent geometry
:
UNI-DIN
Effective length w/Loefgren A:
10” = 250 mm
12” = 300 mm
Pivot to Spindle:
10” = 238 mm
12” = 288 mm
Offset angle:
variable approx. 14° - 23°
Overhang:
variable approx. 5 to 16 mm
Effective moving mass net:
12” = 18,8 grams
Inner wiring:
soft aged pure silver litz wire
Resistance inner wiring:
0.9 Ohms/m
Capacitance inner wiring:
25 pF/m
Cartridge weight balanced:
5.2 to 30 grams
Adjustment ranges:
Pivot plane adjustment:
+/- 6° horizontal
Arm wand height adjustment:
15 mm
Offset angle adjustment:
+/- 4°
Overhang adjustment:
+/- 5.5 mm - max. 11 mm
Azimuth adjustment:
+/- 8°
SRA angle adjustment:
97° to 84°
VTA angle adjustment
28° to 14°
Specifications
