AXIOM BDA 04-2021
14
While attending one screw after the other at a time you
get more and more accustomed to the routine. Most
important is that you don’t do too much (i.e. engage
and fasten too hard..) at a time and always leave a litte
bit of „headroom“.
Please attend each of the 3 grub screws around the
mounting screw gently and only with quarter turn - one
after the other.
You may watch how the bubble in the spirit level reacts
to up and down movement of the screw.
Work in turn - clockwise or counterclockwise - and that
way you approach more and more a perfect level for
the horizontal bearing.
When you are done all grub screws will be fastened
with fairly tight (= high pressure) torque and the bubble
will be perfect center.
Now the bearing plane is perfect level.
