1
Setting Up Your MediaBridge
Step 4: run the MediaBridge Setup
Wizard
The MediaBridge Setup Wizard takes you through the steps to get
your MediaBridge up and running. The Setup Wizard lets you set
the following options:
• Language
• Screen resolution
• Display type • Network type
The last screen of the Setup Wizard confirms your Network Status
information.
How to Use the remote Control in the Menu System
To move around in the Setup Wizard and other on-screen menus,
use the arrow buttons on the MediaBridge remote. When an item
is highlighted, you can select it by pressing the OK button. If an
item has arrows, you can use the left and right arrow buttons on
the MediaBridge remote to change that item’s setting.
Press the HOME button to display the Main Menu. Use the GO
BACK button to retrace your steps in the menu system.
Using the MediaBridge with a Firewall
If you have firewall software installed on your network, you may
need to reconfigure the firewall software to allow the MediaBridge
to access your network computers.
The MediaBridge software setup installs a background program
on your computer called “MediaStreamer.exe.” It is safe to allow
this program to operate on the network. If the MediaStreamer
program is blocked, the MediaBridge will not see any computers
on the network, so the MediaBridge’s media libraries will be
empty.
If you’re still having problems getting the MediaBridge to work
with your firewall software, try making the following adjustments
to your firewall settings:
• Port 6070 must be open for UDP-type network traffic
• Port 40001 must be open for TCP-type network traffic
• Port 40002 must be open for TCP-type network traffic
Continues on the next page...
1662616C_01.indd 13
12/14/05 3:57:02 PM
