There are five bars indicating the signal strength on the screen
NOTE: Two bars is required when sending MMS.
Ø SIM:
Means SIM card is inserted,
Means SIM card
is not inserted
Ø Signal:
, Means no Signal,
Means Signal is good.
Ø
SD Card:
Means SD card is inserted, camera will not turn
on if SD card is not inserted.
NOTE
: Be sure that the PIN of the SIM card is disabled before you
insert it . (You can disable the PIN of a SIM card via your mobile phone.)
3.4) MMS Menu Definition
Slide Power switch into “
Test
” Mode, Select “
MMS Setup
” and Press
“OK” Button to enter into
MMS
Set up Menu. The following is a quick
introduction about how to setup mms function.
Note
: (
All MMS parameters should be configured by PC software
MMS Status
ON/OFF
The default setting is Off,
which
turns
the
MMS
function off. To turn it on,
choose
either
VGA=640x480
or
QVGA=320x240,
SMS=Short Message, which
defines the resolution size of
the MMS picture.
(Please
Note
: Please turn on MMS
Status when you would like
to
use
MMS
function,
Otherwise the camera will
not recognize the SIM
Card and Sginal Icon will
not be shown on Screen )