14
Meter Setup before Testing
Before using your meter for the first time, you will need to adjust the settings that
are listed in detail below.
1.
Meter Setup Mode:
When meter is off, in memory mode or in average mode,
press and hold the right (
►
) button for two seconds to enter meter setup mode.
The meter will automatically enter the setup mode when turned on for the first
time by any method.
2.
Clock:
Set the clock to 12 or 24 hour mode. Press the left (
◄
) button to switch
between the two settings. Then press the right (
►
) button to save your choice.
Now you can start to set the year, month and date.
Note:
The clock needs to be reset after replacing the battery.
3.
Date:
The year will appear at the top of the display. Press the left (
◄
) button to
increase the year. Once you have selected the correct year, press the right (
►
)
button to save your choice and start setting the month. Press the left (
◄
)
button to increase the month. Then press the right (
►
) button to save your
choice and start setting the date. Press the left (
◄
) button to increase the date.
Then press the right (
►
) button to save your choice and start setting the time.
4.
Time:
The hour will appear at the top of the display. Adjust the hour with the
left (
◄
) button until the correct hour is displayed. Press the right (
►
) button to
save your choice and set the minutes. Press the left (
◄
) button to change to
the correct minute. Press the right (
►
) button to save your choice and move to
set the meal marker feature.
OR
Year Month Date