13
Installing the Battery
If the battery has been preinstalled in the meter, a plastic tab will be protruding
from the battery carrier. Simply pull on the tab to remove the plastic strip.
The battery may not be preinstalled in the meter. The meter requires one CR 2032
3.0V coin cell battery. Please find the battery in your carrying case and install it
according to the following steps:
1. Turn over the meter. Slide the battery cover in the direction of the arrow to
open it.
2. Insert a fresh CR 2032 3.0V coin cell battery with the plus (+) side facing up.
3. Close the battery cover until it snaps shut.