Acom LS-100 Скачать руководство пользователя страница 57

Страница: 57 / 76

Pre-Pack mode and

AUTO

SAVE

are very similar but differ in that

Pre-Pack mode

…

Automatically prints By Count and By Weight PLUs

Allows the use of the

key

Does not need to return to gross zero in order to
automatically print again

Pre-pack mode will automatically print again once the weight deviates
by the amount specified in

Auto Print Settings

, for By Weight PLUs.

To turn Pre-Pack on:

1. Start from the

Initial State

. Press

PRE PACK

. The Pre-Pack Lamp turns on.

. Call up a PLU.

. (Optional) Place an item on the scale.

5.  If the Total Price > 0.00, the scale will automatically print.
6.  (Optional) Remove the item from the platter.
7.  The PLU and/or the unit price and tare (if any) are not cleared.

Steps 2 thru 4 can be done in any order.

To turn Pre-Pack off:

1. Start from the

Initial State

with the Pre-Pack Lamp on.

2. Press

PRE PACK

. The Pre-Pack Lamp turns off.

3. The PLU and/or the unit price and tare (if any) are cleared.

The Set Key

You can use the

SET

key to enter the Main Menu from the

Initial

State

or to go to the

Initial State

from the Main Menu.

The Esc Key

You can use the

ESC

key to go from the Password request screen

to the

Initial State

or to back up from any submenus within the Main

Menu, until you get to the Main Menu. Once you are at the Main Menu
you can use the

SET

key to go to the

Initial State

Содержание LS-100












































































Результаты поиска

Содержание LS-100

Отзывы:

Бренды по названию

Популярные бренды

Acom LS-100, Руководство пользователя

Результаты поиска

Содержание LS-100

Отзывы:

Бренды по названию

Популярные бренды