Acom LS-100, Руководство пользователя

Страница: 13 / 76

9
Make sure that the Power Switch is off. Pull on the cassette handle to
remove the cassette drawer.
Once you have removed the cassette drawer you may follow the
instructions shown on the large sticker labeled “Installation” on the
cassette mechanism.
Removing Labels:
When the printer
runs out of labels:
1) Pull and remove
the Pick-up Clamp
(f). When you do
so, some of the
backing paper may
rip; this is normal.
Remove the excess
collected backing
paper from the Pick-
up Clamp (f) and
discard the paper
making sure NOT to
throw out the clamp.
2) Remove and discard the cardboard label core which should be
located on the Label Roll Spool (b) making sure NOT to throw out the
Label Roll Spool (b). Make sure to also discard any excess labels
and/or backing paper along the label path. The label path is shown in
red on the Installation sticker in the cassette drawer.