Acom LS-100, Руководство пользователя

Страница: 25 / 76

21
Password
When you purchase an LS-100, it comes with password protection by
default. The initial password is “0000”; four zeroes. You can disable
all passwords or change the password. If your scale has password
protection enabled, then you can change the password by following the
instructions in the
General Programming section under Password
Change . If your scale has password protection disabled or you wish to
disable password protection, you must contact your Acom Authorized
Dealer to change this feature. Changing this feature is only permitted
by licensed individuals.
There are only two places where the LS-100 will show the password
entry screen:
1
to enter the Main Menu and
2
to void PLU sales. If
you press
SET
or
Func.
from Sales Mode ( Initial State ) you will see
the following screen:
Input Password
This is your cue to enter the password; of course, if passwords are
disabled then this screen will always be skipped. For a new scale, you
would simply press
0 0 0 0 PRINT
and then the
scale will proceed to the next screen.
Passwords are composed of the numbers 0 to 9 and must be 4 digits
long. As you type your password, the Total Price display will display a
dash for every number that you press. When you are done entering
your password, press
PRINT
. If you entered the correct password you
will go on to the next screen; if not, you will remain at the password
entry screen.
If you wish to exit the password entry screen, press
ESC
and you
will go back to Sales mode. Do not forget your password; write it down
somewhere safe. If you forget your password, you will NOT be able to
access the scale; the only way to correct this problem is to call your
Acom Authorized Dealer who may have to clear out ALL of the scale’s
memory and completely reprogram the scale, which may or may not
incur additional charges.
Note: if you wish not to use passwords,
have your Acom Authorized Dealer set your scale up accordingly.