Acom 1000 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 52

Acom 1000 Скачать руководство пользователя страница 12

User's Manual | ACOM 1500 | HF + 6 m Linear Amplifier

Page 12 of 52 | S e c t i o n GENERAL INFORMATION

August 2021

PRECAUTIONS:

DANGER

The amplifier works with high voltages up to 3000 V, which are LETHAL!

For your safety, pull the amplifier power plug out of the mains wall outlet and WAIT AT
LEAST 30 minutes EACH TIME BEFORE you remove the cover of the amplifier. Do not
touch any part inside while the amplifier is open because some residual voltages may
still be present.

DANGER

Never  allow  anyone,  ESPECIALLY  CHILDREN,  to  push  or  put  anything  into  holes  in  the
case - this will cause electric shock. NEVER TOUCH AN ANTENNA or antenna insulators
during  transmission  or  tuning  -  this  may  result  in  an  electric  shock  or  burn.  NEVER
EXPOSE  the  amplifier  to  rain,  snow  or  any  liquids.  AVOID  placing  the  amplifier  in
excessively  dusty  environments  or  in  direct  sunlight.  DO  NOT  OBSTRUCT  AIR  INTAKE
(rear panel) and EXHAUST (top cover) areas of the amplifier. Keep a minimum clearance
distance  of  10  cm  (4  inches)  to  the  intake  and  50  cm  (20 inches)  above  the  exhaust
opening.

WARNING

Do  not  undertake  on  your  own  repairs  or  changes  in  hardware  or  software  of  the
amplifier in order not to endanger your or other's health and life and not to damage the
amplifier  and  the  equipment  connected  with  it,  not  covered  by  warranty.  The
manufacturer is not  liable for another's actions and responsibility shall be  assumed by
the doer.

WARNING

To avoid damage (not covered under warranty) read the Section

2 INSTALLATION

of this

User's Manual carefully. If you have any doubts about the installation, operation or
safety of the amplifier, please, consult your dealer.

«
...
10
11
12
13
14
...
»

Содержание 1000





















































Отзывы:

Нет отзывов