Single port KVM over IP switch
24
Figure 5-9. Remote Console Options Menu:Cursor
• Video Settings
Opens a panel for changing the IP-KVM switch video settings. IP-KVM switch features
two different dialogs, which influence the video settings.
Video Settings through the HTML-Frontend
To enable local video port, select this option. This option decides if the local video
output of IP-KVM switch is active and passing through the incoming signal from the
host system.
The option Noise Filter defines how IP-KVM switch reacts to small changes in the
video input signal. A large filter setting needs less network traffic and leads to a
faster video display, but small changes in some display regions may not be
recognized immediately. A small filter displays all changes instantly but may lead to
a constant amount of network traffic even if display content is not really changing
(depending on the quality of the video input signal). All in all the default setting
should be suitable for most situations.
Video Settings through the remote console
Figure 5-11. Video Settings Panel
Brightness
Controls the brightness of the picture
