Single port KVM over IP switch
36
Figure 5-17. KVM Vision Viewer Setup step
6.2.3.2
Create a New Device
¾
Start KVM Vision Viewer
¾
Click on “
Device”
and select
“New Device”
to create a new device
Figure 5-17. Create a new Device
Figure 5-17. Device Configuration dialog
Device Name: Enter a name to your device.
Network Address: Enter an IP address the IP-KVM switch uses.
Authentication Port: This is a fixed number “443”.
Username: The factory default Username is “super”
Password: The factory default Password is “pass”.
5-5
