No
(Pan or tilt’s position will not feedback while out of step) or
Yes
(Feedback while pan/tilt out of
step), press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the
unit idle one minute to exit menu mode.
Dimmer Curve
To select
Dimmer Curve
, press the
ENTER
button to show the
DIMMER CURVE
on the display. Use
the
DOWN
/
UP
button to select the
Mode1
or
Mode 2
or
Mode 3
or
Mode 4
. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any change
press the
MENU
button again. Press and hold the
MENU
button about one second or wait for one
minute to exit the menu mode.
Mode 1(Optically Linear):
The increase in light intensity appears to be linear as DMX value is increased.
Mode 2(Square Law):
Light intensity control is finer at low levels and coarser at high levels.
Mode 3(Inverse Square Law):
Light intensity control is coarser at low levels and finger at high levels.
Mode 4(S-cure):
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Show Focus
To select
Show Focus
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
5m,10m
or
15m
, press the
ENTER
button to store. Press the
MENU
button back to the last menu
or let the unit idle one minute to exit menu mode.
Show Setting
To select
Show Setting
, press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
Show
Mode, Slave Mode
or
Sound Sense.
10A