DMX Settings
To select
DMX Settings
press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
DMX
Address
,
DMX Channel Mode
or
DMX State.
DMX Address —
DMX512 address setting
To select
DMX Address
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to adjust
the address from
001
to
512
, press the
ENTER
button to store. Press the
MENU
button back to the
last menu or let the unit idle one minute to exit menu mode.
DMX Channel Mode —
channel mode
To select
DMX Channel Mode
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to
select
Mode1 (17)
or
Mode2 (20)
channels mode, press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
DMX State
—
fixture state while DMX single stops
To select
DMX State
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
Master Slave
(fixture enters to master slave mode),
Blackout
(fixture blacks out if DMX signal stops)
or
Hold
(fixture continues to obey the last command it received Via DMX if DMX signal stops),
press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle
one minute to exit menu mode.
Fixture Settings
To select
Fixture Settings
, press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
Pan
Inverse, Tile Inverse, P/T Feedback
,
Dimmer Curve
or
Show Focus.
Pan Inverse
To select
Pan Inverse
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
No
(normal) or
Yes
(pan inverse), press the
ENTER
button to store. Press the
MENU
button back to
the last menu or let the unit idle one minute to exit menu mode.
Tilt Inverse
To select
Tilt Inverse
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
No
(normal) or
Yes
(tilt inverse), press the
ENTER
button to store. Press the
MENU
button back to the
last menu or let the unit idle one minute to exit menu mode.
P/T Feedback
To select
P/T Feedback
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
9A