ACME Libre, Руководство пользователя

Страница: 11 / 36

4.4 Lamp Replacement Warning

When the lamp reaches 300 hours before its service time, the display will flash the message
“Replace Lamp Soon” for up to 5 minutes. During this period, the fixture will still work normally.

When the lamp reaches its service time, the display will flash the message “Replace Lamp Now”
for up to 10 minutes. After 10 minutes, the fixture will return to normal operation.

When the lamp is continuously used overtime, the display will flash the message “Lamp
Timeout Use, Replace Lamp Now” for up to 10 minutes. After 10 minutes, the fixture will return
to normal operation.
Attention: Damages caused by the failure to replace the bulb in time are not subject to warranty.
5. How To Set The Unit
5.1 Main Function
Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by the ENTER button. Use the
UP/DOWN button to choose the submenu, press the ENTER button to store and automatically
return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit menu mode.
The main functions are shown below:
10E