4-
4. How to control the fixture
Three ways to operation:
A. Master/Slave operation
B. Universal DMX controller
C. Easy controller CA-8
A. Master/Slave operation
The unit can be linked together in daisy chain as many as you need in master/slave mode to
perform the great built-in pre-programmed lighting shows triggered by music.
In Master/Slave mode refer to the DMX settings below:
Master unit: DMX start address MUST be set to 001. (First DIP switch = ON, all other
are OFF)
Slave units: DMX start address may have any value but NOT 001 (example: set the
first 3 DIP switches to ON)
﹡
2-light show
Dipswitch 10
”off” means the unit works normally and “on” means inversion. In order to
create a great light show, you can set dip switch 10
”on” on any unit that is linking to the
master unit to get contrast movement to the master unit, even if you have two units only.
Dipswitch 10 on the first (Master) unit is no use for the 2-light show as it is the master unit
that operates the light show.