7A
DMX Address
Select
DMX Address
, press the
ENTER
button to confirm, the present
address will blink on the display. Use the
UP
and
DOWN
button to adjust the
address from
1
to
512
. Once the address has been selected, press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one
minute to exit the menu mode.
Channel Mode
Select
Channel mode
, press the
ENTER
button to confirm, the present
address will blink on the display. Use the
UP
and
DOWN
button to select
8CH(mode1),12CH(mode2)
，
15CH(mode3). Once the channel mode has been
selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one
second or wait for one minute to exit the menu mode.
Show Mode
Select
Show Mode
, press the
ENTER
button to confirm, present mode will
blink on the display. Use the
DOWN
and
UP
button to select the
Show 1
or
Show
2
or
Show 3
or
Show 4
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one
minute to exit the menu mode.
Show 1 mode:
Fixture is placed on the floor. Tilt movement angle 210
°
.
Show 2 mode
:
Fixture is fixed under ceiling. Tilt movement angle 90
°.
Show 3 mode:
Fixture is placed on the stage, in front of the audience
The spot is always projecting to the audience’s direction; i.e. in front of the
stage. Pan movement angle (left to right to left):160°. Tilt movement angle:
90° (60°above horizon; 30°below horizon.)
Show 4 mode:
Fixture is fixed under ceiling.
The spot is mainly projecting in front of the stage. Pan movement angle(left
to right to left):160
°
. Tilt movement angle:90
°
(vertically, front 75
°
; back 15
°
)
16A
12 channel mode:
