ACM ACM-TPG08, Руководство пользователя

Страница: 12 / 84

11
[Rear Panel]
1. DC Power : DC12V 4.5A
2. Cooling Fan
3. Serial Port: This is Serial communication(RS-232C) cable connection terminal.
4. Audio Out: RCA audio out terminal.
5. S-Video Out : Output for S-Video monitor. Normally you can get clearer image
than BNC.
6. NTSC/PAL select switch : Choose the proper position.
7. Video Out : For main monitor.
8. Loop Out : This sends the images from the cameras the other devices.
9. LAN Port: This is LAN cable connection terminal.
10. Audio In: RCA audio in terminals. You can record four channels at the same
time.
11. Sensor out : This terminal blocks connect external electric devices to the product
( Warning Lamp and others).
12. RS485 port : For control the pan and tile cameras. Make sure that the polarity.
13. Sensor In : This terminal connects external sensor to the product.
14. Video In: This receives images from cameras and sends them to monitors.
15. VGA port: video output for VGA display
16. USB ports : This port is for USB device.
※
For more details, refer to [CH 2. Installation Method and Cautions].
SENSOR IN RS 485
AUDIO IN
SERIAL
DC12
1. DC12V
2. FAN
3. SERIAL 4. AUDIO OUT
5. S-VIDEO
6. NT-PAL
7. VIDEO OUT
8. LOOP OUT
9. LAN
10. AUDIO IN
11. SENSOR OUT 13. SENSOR IN
12. RS485 14. VIDEO IN
15. VGA
16 . USB
CH 1 Product Introduction