-9-
LEDs definition
5 status LED display the state of the product:
LED
Color
Description
WLan
Tx/Rx(*)
Blue
Flashing for WLAN Tx/Rx activity.
Serial
Tx/Rx
Green
This led blinks when sending or receiving data on the
serial link.
RS422
/485
Green
This led is ON when you use a differential (RS422 or
RS485) electrical interface.
Diag(*)
Red
After power up this led stays on until the product is
operational (less than 10s).
If the led stays on steadily more than 30 seconds at
power up, the product is out of order.
After boot-up it indicates either special states
depending on the active service, or reception errors
on the serial port.
In serial port administration mode, this led blinks twice
per second, indefinitely.
Power
Green
This led is ON when the power supply connector
correctly powers the product.
(*) Diag + Wlan Tx/Rx: alternative blink
This blink is meaningful only in infrastructure topology. It means that the
product did not yet associate with an access point, or WPA keys are wrong.
Regulatory compliance
The unit conforms to the following European Council Directives:
N°
Title
1999/5/CE
Radio and Telecommunications Terminal Equipment
Directive (R&TTE)
73/23/CE
Low voltage directive
2004/104/CE
EMC for motor vehicles
The device has been certified to comply with the European directives and is
appropriately CE marked.
N°
Title
EN60950
Data processing devices – Security
EN61000-6-2
EMC emission, industrial grade
EN61000-6-4
EMC Immunity, industrial grade
EN301-489-17
EMC for radio equipment 2.4Ghz & 5GHz
EN 300 328
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Wideband transmission systems, 2.4
GHz ISM band
EN 301 893
Broadband Radio Access Networks (BRAN);
5 GHz high performance WLAN
MIL-STD-810F
Shocks & vibrations according to 514.5 and 516.5
methods
UTAC E2
CE standard for electronic equipments installed aboard
vehicle
FCC
Part 15 (Common testing standard for most electronic
equipment)
