-8-
LEDs definition
The product has 8 LEDs to indicate the status of the product.
LED
Color
Description
Power 1
Green
This LED is ON when
a power supply is connected to pins 3 & 4 of the
power connector
a POE source is connected to LAN2
Power 2
Green
This LED is ON when a power supply is connected
to pins 1 & 2 of the power connector
Diag
Red/
Green
This led indicates the unit operational state.
OFF
:
Power supply is off
Red
:
Initialization during 60s after power is
applied then goes Green
Red for more 120s
:
hardware failure
Green
:
Ready to use
Blinking
:
Firmware in flash is loading
Device is in emergency mode because
firmware is corrupted. Re load firmware
with WaveManager
LAN 1
LAN 2
Green
On:
Link on LAN established
Flashing
: Tx/Rx activity
Green
:
connected in 100 BASE Tx
or 10 BASE T
Off
:
Link on LAN broken
C-KEY
Red/
Green
Off:
C-KEY in factory state
Red:
the C-KEY is not detected, data is
invalid or corrupt
Green:
the C-KEY data is valid
Blinking:
during reads and writes to the C-KEY
State
Green
Off:
the radio is disabled or in CAC/DFS
Blinking:
the product is unassociated
solid “
On
”
:
the product is associated
Activity
Blue
Flashing:
Radio Tx/Rx activity
