-3-
5.
Device configuration
Click to the «
Web
» button to access from your web browser to the built-in
web-based interface using your web browser. The default page displays the
device status. Now select the “SETUP” tab.
You will be asked for a username and password. You must choose the
root
user. No password is required by default. You get now access to the setup
pages.
On the “wireless interfaces overview” page you must:
1.
Enable the Wi-Fi radio interface
to set up its Wi-Fi parameters
(alternatively you can navigate to change network and services
configuration).
2.
Select your country
in order to enforce applicable
regulation
rules
.
Set the following essential parameters:
•
The operating mode: Access point, client (bridge)
•
Wi-Fi parameters: 802.11 mode, radio channel, SSID
•
Wi-Fi security parameters (WEP, WPA, WPA-PSK, WPA2, WPA2-
PSK, SSID broadcast or not)
You will find a complete description of all modes in the WaveOS user guide.
Upon delivery, the default factory settings are:
•
Radio interface
disabled
, preset for
§
access point mode
§
SSID “ACKSYS”
§
No security
§
Automatic radio channel and 11n mode
•
IP 192.168.1.253
